Bottom Flush Mount French Cleat Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Download and print this new French cleat lock which is perfect for your small and light tools!
- Ocena
- 5 / 5
- Polubienia
- 136
- Pobrania
- 643
- Wydruki
- 4
- Wyświetlenia
- 3064
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my 2nd French cleat lock design to help keep your tool holders in place on your wall when you remove your tool. It requires that your tool holder sits flush with the bottom of your cleat. It's perfect for smaller or lighter tool holders where my swiveling cleat lock might not work.
To see my 1st design, the Swiveling French Cleat Lock, go here https://www.printables.com/model/161421-swiveling-french-cleat-lock
These were printed in Inland White PLA with a 20% infill and 0.2 layer height
To use these, you'll need qty 2 #8 washers and qty 2 #8 round head screws. The length is up to you but ¾" should be fine.
Learn more about this model from my YouTube video: