1 / 2
Photosensitive 1.5mil Microcentrifuge Tube Container — zdjęcie 1
1 / 2

Photosensitive 1.5mil Microcentrifuge Tube Container

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a storage container meant to store 1.5mil tubes in complete darkness, in order to block all light I recommend using black PETG for the cup and lid, however if PLA is needed for color, simply increase the wall count to better block light. (Print Settings->layers and perimeters->vertical shells) three or four walls should be plenty.

Orient the two halves so the flat sides are both down.

No supports are needed.

Tagi