The blaster DH-17
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Blaster from Star Wars
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
DH-17 Blaster - Become a part of the Alliance!
Dreaming of replenishing the arsenal of a real rebel? This 3D model is your chance! The DH-17 Blaster, which you have seen more than once in the hands of brave heroes of Star Wars, can now be in your hands. The model is optimized for 3D printing and does not require complex configuration. Download, print, assemble - and may the Force be with you!
Printing recommendations (PLA, 90% scale):
Material: The model is optimized for PLA printing. PETG is also suitable, but PLA provides better detail on small elements at a reduced scale.
Scale: The recommended scale is 90%. At this scale, the model retains all the proportions of the original, but becomes much easier to print on 220x220 mm tables and is less demanding on plastic consumption.
Slicer settings:
Perimeters: 3-4 (for the strength of thin walls).
Filling: 15%
Supports: yes
I would also be happy if you printed and shared your impressions, and I would also be happy about remixes and ideas for this model. =)