1 / 5
Sleeve with magnet and case for phase rotation meter — zdjęcie 1
1 / 5

Sleeve with magnet and case for phase rotation meter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

As title says. For my cheap phase rotation meter I created a sleeve with magnet and a storage case

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

For my work I have several tools. One of them is a simple phase rotation meter.

I like my meters to be able to hang with a magnet so I created a sleeve for the device. Also I noticed that the storage bag with zipper does it's job but it's too thick to put it in a drawer I want it to be. So I created a case to store the device in. Maximum thickness I could do is 40mm. Width max 80mm. Those 2 dimensions were my goal. And achieved:

80mm wide, 35mm thick. Length: 275mm (no limitiations here in my situation, made it as short as possible but still being able to put all parts in the case with ease)

So, it's designed to suit my needs.

Printed in TPU.

The 'hinge' is also TPU but needs a little work: Fold the case closed ('forcing' the hinge, but hey, it's TPU!). When holding closed, gently warm the hinge with a hot blower or something so the hinge part will get somewhat softer and will form to the shape needed.

3 pairs of magnets then do the rest of the job, keeping the lid closed.

Print in place

No supports needed (in my case just 1 wire of filament came loose on the top edge of the sleeve)

The Case need 6 magnets 10mm diameter, 2mm thick

The sleeve needs 1 magnet: 18mm diameter, 2.5 to 3mm thick

Tagi