1 / 5
DayPlus Lithium 3/8" Ratchet Wrench - Battery Retaining Tab Repair Clip. Also other brands ** — zdjęcie 1
1 / 5

DayPlus Lithium 3/8" Ratchet Wrench - Battery Retaining Tab Repair Clip. Also other brands **

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A means of repairing the battery retaining mechanism when the clips break off so you can still use the battery.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

** Other brands using this shape battery pack include Feytory, EmdTOOL, Chentianxia, and Cisvis.

Commissioned repair for a friend's ratchet wrench. The little tabs that hold the battery in place in the tool had snapped off, so together we designed a clip to make it possible to continue using the battery without having to use a spare hand to hold it in place!

To make space for the designed clip, and to allow it to be designed for maximum strength and 3D printability and holding itself in place once fitted to the battery, I chose a modification to the existing battery tabs which is a bit tricky to achieve. If you have a micromotor and some small thin discs and a small drill bit and a file, then you should be able to recreate this repair with a bit of patience. Considering the clip costs a mere 6p  (£0.06 GBP) to print, that has to be better than buying more batteries every time a retainer tab breaks :o)

#4 is my best version, designed to be printed with the narrower side facing down, and can just about be removed with one hand if you have fairly strong fingers, otherwise use both thumbs. I have two other versions available so ask if you need them - #3 is tight enough to have to pop one clip a little with two thumbs and pull a bit while releasing the other one. #2 is ridiculously tight and needs to be released with a screwdriver to poke each tab in turn! 

I used Elegoo PLA+ which seems fine. I tried in TPU but it was too flexible to retain properly. I used 0.4mm nozzle, 0.2mm layers, 4 walls, no support, adhesion I suggest a 2-line brim with 0.8mm spacing from the model so it doesn't attach but forces the slicer to print the outer shell first rather than trying to print all the little fiddly bits first! 

The following cutouts need to be carried out on the broken-tab battery to make space for the repair print...

First note the angle of the tabs - they are not perpendicular to the faces of the battery pack, they're skewed. Keep to this angle when trimming. Knife off a little of the edges of the broken protruding tab to narrow them a bit, and then use something like a fine small cutting disc to cut a slot each side of the tab...

Continue those cuts down to the top of the topmost horizontal strip on the tab body. I also made a small dent with the disc at that level to help guide the drill in the next step. Drill some holes through the tab body to weaken the remaining tab, with a strip of thin wood or something behind the tab to avoid any oops into the battery body!

That should weaking the tab enough to be able to snap it off with a long nose plier. Don't be rough, if it won't break easly then remove some more structure.

Now start tidying up the slot with a knife or a file, watch your fingers!!! The plastic is quite hard. Check against the next picture, you want a nice flat bottom on the slot and clean sides, and remember the skewed angle of the slot as this will help retain the printed clip...

It's not TOO critical, if you made the slot too narrow you can knife it wider, watch your fingers again :o) Check your slot against the printed clip to see if it's going to go in yet.

The above image is how my prepared slot ended up. The skew is different on each side of the battery, just to keep you on your toes!

Ease the printed clip into place, pop the battery into the wrench and carry on working :o)

Please Like this model if you find it useful.

If you REALLY like it, https://www.buymeacoffee.com/gigabeast :o)