SN58B Crimper Gridfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple 5Ux2U Gridfinity Insert for the SN58B crimping tool (by Lion Rage). Probably compatible with most SN-series tools (ex. SN-28B, SN-48B).
Designed in 2 variants:
Low profile 3U in height (not stackable)
Normal profile 4U in height with deeper pocket and aditional finger cutout.
Printed on: Ender 3 V3 KE
Layer height: 0.2 mm
Infill: 2,5% gyroid
Wall loops: 3
Top/Bottom layers: 4
Raft: No
Support: No
Filament: Sunlu PLA+ 2.0 Grey
Low profile: 209,5 mm x 83,5 mm x 25 mm
Print time : around 3 hours
Normal profile: 209,5 mm x 83,5 mm x 32 mm
Print time : around 3,5 hours
Attention: I didn't print the 4U model. I added an extra finger cutout to make it easier to take out the crimping tool (the 4U version is deeper and the crimping tool should sit flush with the top).