USB Hub PCB Holder

I've made a quick bracket for this USB Hub from aliexpress:

https://www.aliexpress.com/item/1005007937606123.html

I think you can get this from local hobby stores as well. Its model number probably is something like this: XL334P4-USB2-4P-HUB

There are 2 versions: One for M3 SHCS, 20 x 20 mm spacing, the other just has 4 posts which can be glued down.

I made the adhesive version first, because i just superglued it to the bottom of the enclosure, but it fit well, so i decided to make the screw version as well to upload it here.

Print instructions:

I used PETG, so the clip can bend when installing the PCB. You should use painted supports just for the bottom of the clip. It's 0.2 mm lower than the rest of the bottom surface, so you can highlight it easily in the slicer. Everything else can be bridged. 

You should enable Z hop for the adhesive version, so the posts won't get knocked over by the nozzle when the edges start to curl upwards just before the printer reaches the bridge layers.