RFID NFC Filament Tag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nfc sticker holder for filament
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried some other tags and none really did what I wanted. I want to feed my U1 from both the standard filament rollers and also at times from a dryer. I'm running the Paxx12 firmware so I also wanted my custom NFC tags to work With both options. With these clips I can hold them up to the U1 as I feed from the roller and then clip them onto the filament once they are feed into the toolhead. They snap nicely on and off of the filament and are very secure. They will work with any 25mm round NFC sticker, I've gotten some from both AliExpress and Amazon. I also printed these from ABS so I don't need to remove when drying.