Kayoumini - Walksnail Avatar Nano Cam holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cam holder for the Walksnail Nano & Mini 1S Cam
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here are a few camera mounts for the Walksnail Nano & Mini 1S Cam.
The mounts were actually designed for my own frame, which you can find here.
The camera housing should be compatible with the Kayoumini.
I recently bought some eSUN TPU LW.
It’s a foamed filament designed to make the parts even lighter.
I then printed the parts at a flow rate of 0.6.
I’m generally satisfied with the results. There’s a lot of stringing and bubbles, but it cuts well with a sharp scalpel.
You can also use the height range modifier in Bambu Studio to print with different flow rates using TPU LW. That works very well.
Printing tip:
Simply place the part on the round camera surface, and then the parts can be printed without supports.
Have fun