2.5" External Drive case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have made enclosure for 2.5" disk to make old hard/flash drive an external/portable drive. I used UNITEK adapter 3.1…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — NoDerivatives
I have made enclosure for 2.5" disk to make old hard/flash drive an external/portable drive. I used UNITEK adapter 3.1 to SATA III and my old HDD drive. You can use it without lid it is tight fit. Drive should not get out of this case, but if you want you can print lid and fix it to case using 2x M3x16 screws. Have fun with it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.16
Infill:
15
Filament: Fiberlogy PETG Black
Notes:
To fix lid into case use 2x M3x16 screws
Better print it with PETG, disks can get very hot when operating for long time. So PETG is better for making this enclosure.
Post-Printing
Use 2x M3x16 screws to fix lid in to case.
Category: Computer