HEMA Custom Hilt for SIGI Forge Sabers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hilt designed for gloves such as the HF Black Prince and to better approximate later period saber hilts.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
HEMA Custom Hilt for SIGI Forge Sabers
I really like the SIGI sabers, but the hilt never quite felt right to me, especially when used for later period sources. In use it felt a bit clumsy, mainly with the thumb grip. The saber didn’t always sit securely in my hand and had a tendency to twist. With my HF Black Prince gloves it was also hard to really feel the the handle and keep good edge alignment.
So I decided to make a custom handle to address these issues. I made the kickout at the end of the hilt more pronounced to improve control and help prevent the saber from twisting in the hand. I also added some material along the backstrap for better support and shaped more defined ridges to improve indexing with gloves. The grip is slightly thinner as well, which should make it easier to fit larger gloves into the Pro guard.
Hopefully it works well not just for me, but for anyone else who’s had similar problems.
You’ll Also Need:
Hockey tape
Wire - optional
Assembly Notes:
Tightly wrap the 3D printed hilt in the hockey tape.
Add the optional decorative wire
Take the Sigi saber apart and remove the metal collar from the original handle. You might need to use a rubber hammer to make the hilt come apart.
Place the collar on the new handle
Reassemble the saber
Print Settings:
Material: PETG or stronger
Nozzle: 0.4 mm or larger
Layer height: 0.2 mm
Perimeters: 3
Infill: 20%