1 / 7
Tic-Tac-Toe O/X — Screw-lid travel case with fabric game board — zdjęcie 1
1 / 7

Tic-Tac-Toe O/X — Screw-lid travel case with fabric game board

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A complete 3D-printed Tic-Tac-Toe set with a screw-top storage case that holds all pieces and a fabric game board hidden

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Description

A fully 3D-printed Tic-Tac-Toe (Morpion) game with its own screw-lid travel case.

The lid screws onto the base and securely holds all the X and O pieces inside during transport.

The lower section of the case features a hidden compartment designed to store a 51×35 cm fabric cloth, which serves as the game board — no extra accessories needed!

The overall dimensions of the assembled case are 12.5 × 12.5 × 8 cm.

Print settings

- Layer height: 0.2 mm

- Infill: 15% — Gyroid pattern

- Nozzle: 0.4 mm (can be increased to 0.6 mm for faster printing)

- Supports: not required

- Material: PLA recommended

Assembly

1. Print all parts (lid, base, X pieces, O pieces)

2. Fold the 51×51 cm fabric and place it in the lower compartment of the base

3. Stack the X and O pieces inside the case

4. Screw the lid on — ready to go!

What you need

- A piece of fabric: 51 × 51 cm (acts as the game board)

Version history

- v1.0 (April 2025): initial release

Tagi