Roomba Cliff Sensor Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Cap for Roombas Cliff Sensor, the Sensor will be deactivated with this modification.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 178
- Wydruki
- 6
- Wyświetlenia
- 1661
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a Cap for Roombas Cliff Sensor, the Sensor will be deactivated with this modification, so Roomba doesn't get Stuck on black carpets
BE CAREFUL - Roomba can now kill himself! He won't stop on stairs or other cliffs.
I have tested it on Roomba 671, but I think it should fit on all others.
Print 4 pieces, use "Detect thin wall", and set Seam-Position to Random (as always with One-Perimeter Things).
Updated to v6, finally I found the problem which knocked it out, Roombas Front-Bumper pressed it away, so I simply cutted off 2 mm of the front.
As multiple Makers mentioned, it might be relevant which Filament you use. Ror me a simple red PLA works fine, some Makers were forced to use some kind of (semi-) Transparent Filament.