1 / 12
Eldritch eye Akragkos
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Standard Digital File License
This is model of articulated monster.
First showed images are 3D renders, later are photos
It requires support, but removal of them is not that bad, for me is nearly 30-40min for print, and personally I very like the effect.
Any not flexible and durable enought material to not break during support removal should be good, so I dont recommend PLA wood but normal dried PLA should be fine. I recommend print this at least 15cm long (in not changed pose) or joint can become too fragile.