Ulanzi Filmog Ace FM01 - Fog Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fog Diffuser for the Ulanzi Filmog Ace FM01 - Stops fog from going straight outwards
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I wanted to put my fog machine in a big pot to create the effect of a steaming pot of soup for a theatre production.
This fits into the top of the Ulanzi Filmog Ace FM01 portable fog machine and disperses the fog outwards instead of straight up. I'm guessing the other units are probably very similar and as long as the hole on the top is the same size you're good.
If you want to create your own tool to redirect the fog, the hole on the top of the fogger is just over 10mm wide, so making the tube 10mm outer diameter works fine. The Inner diameter of this print is 7mm (but could probably be bigger if needed),
Source TinkerCAD file is here: https://www.tinkercad.com/things/2HYky4R1mbl-ulanzi-filmog-ace-fog-diffuser
Printing & Assembly
Print it with supports, input tube downwards. I just went default 0.2mm profile, nothing fancy.
The lid just needs a tiny bit of glue to hold it in place.
I printed it with PLA - the temperature of the fog didn't seem to bother it.