[MMCX] Improved Koss Porta Pro/KPH40 MMCX mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another MMCX mod for KOSS Porta Pro/KPH40. This one is low profile, tries not to limit tilt as much as other designs.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 742
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
People were asking for one for the Porta Pro/KPH40 after the one for the KSC75 that I made. The philosophy is the same, limit tilt as little as possible, while keeping it easy to print and use.
Flower grill can be found here:
Make
I printed on Prusa Mini with 0.25mm nozzle and 0.07mm layer height, 100% infill with Devil Design PLA.
Parts and supplies needed
2x M2 self tapping ~5mm screw with flat bottom. Like the ones found in plastic housings.
https://nl.aliexpress.com/item/1005005264316197.html
Needs to be shorter than 6mm!! Otherwise you damage the driver.2x printed parts. choose the design you like 😀 L/R/heart/no marking or something you want yourself. files are there!!
Glue (I use two component glue)
2x MMCX sockets (for 3mm hole)
https://nl.aliexpress.com/item/1005004039277855.html
How to
print parts
glue mmcx to the part (you may have to make the hole larger, for my printer I did not)
wait for glue to harden
solder to driver
close with screws
enjooy