1 / 3
TPU canopy for Air 65/75 2mm light and stiff design for lower angles. — zdjęcie 1
1 / 3

TPU canopy for Air 65/75 2mm light and stiff design for lower angles.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this remix of my favorite TPU canopy, it has a second lower hole for the antenna (needed for low angles).

Ocena
5 / 5
Polubienia
15
Pobrania
137
Wydruki
1
Wyświetlenia
571
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Upgraded version of my favorite canopy with added rigidity and a second antenna hole for lower angles. You can print this from D40-D50 TPU, and it should be great and indestructible.

Tagi