Robin With Red Breast - single-colour printers can make this easily in two parts.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cute robin for mounting anywhere, design your own mount or use the included STL with 6mm diameter peg.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've made various printed garden ornaments, this time I wanted a Robin :o)
It's a bit smaller than a real robin, although you could scale it.
I used PLA+ with 0.4mm nozzle, 0.2mm layers, no support or adhesion for the body and the peg BUT use a 2-line brim for the red insert and leave it fully attached so you can use it with a few spots of glue to easily attach it into the body cavity. Print the peg with the hole at the top (facing away from the printbed).
The bit that sticks out of the robin's foot for attaching to a peg is 2.5mm wide by the 2mm thickness of the model. If you design your own mounting peg, go for about 2.8mm by 2mm slot (and about 3mm depth to the hole) so it's fairly easy to push the robin foot-tab into the hole.
6mm diameter peg happened to be right for the end of the bamboo I wanted to push the peg into with just a friction fit. With the enclosed STL you could just drill a 6mm diameter hole in anything and pop the peg into it.
The robin's red breast insert is thinner than the body so it picks up a bit of light from behind and shines through making it glow nicely :o)
Please Like this model if you find it useful.
If you REALLY like it, https://www.buymeacoffee.com/gigabeast :o)