Capsule Filling Tool for Herbs & Tobacco
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Capsule Filling Tool for Herbs & Tobacco for the X-Max v3 pro vaporizer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Public Domain
Capsule Filling Tool for Herbs & Tobacco (STL Project)
This project was designed to solve the common frustration of messy and imprecise manual filling of dosing capsules. The tool acts as a dedicated station to stabilize capsules and ensure an efficient material transfer (herbs or tobacco) without any waste.
Key Features
Optimized Geometry: Precision-engineered to fit standard dosing capsules, preventing them from tipping or moving during the filling process.
Anti-Spill Funnel System: The integrated funnel profile guides the material directly into the capsule, eliminating mess and saving your expensive herbs.
3D Print Optimized: The model is designed for easy printing with minimal to no supports required on most FDM and SLA printers.
Workflow Efficiency: (If applicable) The layout allows for preparing multiple capsules at once, significantly cutting down on prep time.
Why Use a Dedicated Filling Accessory?
Manually filling small capsules often leads to debris on the rims and threads, which can prevent them from closing properly or lead to device malfunction. Using this 3D-printed tool ensures clean contact edges, which is essential for a proper seal and optimal airflow in your device.
Technical Print Recommendations
Material: It is recommended to use food-safe materials such as certified PLA or PET-G, as they will be in direct contact with your herbs.
Infill: 15–20% is sufficient for durability and structural integrity.
Layer Height: 0.2 mm works great for functionality, but 0.12 mm will provide a smoother finish on the funnel slopes for better material flow.
How to Use
Place the empty capsule(s) into the slots of the printed tool.
Distribute your material over the top surface and sweep it into the openings.
Lightly tamp the material (if using a dedicated tamper tool).
Remove the tool and snap the lids onto your perfectly filled capsules.
Designer’s Note: This tool was created to eliminate the "dirty work" and make the capsule preparation process as professional, clean, and repeatable as possible.