1 / 5
Spare Wheel Mount for Hyundai Sonata DN8 — zdjęcie 1
1 / 5

Spare Wheel Mount for Hyundai Sonata DN8

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spare Wheel Mount for Hyundai Sonata DN8 with Hexagonal 13 mm / M8x35 mm Bolt

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Overview

This is a practical 3D-printed replacement or custom spare wheel mount designed specifically for the Hyundai Sonata DN8 (2019–present). It allows you to securely fasten the spare wheel in the trunk using a standard M8x35 mm bolt with a 13 mm hexagonal head.

The model is compact, easy to print, and requires no additional modifications to the vehicle. Just print, add the bolt, and install.

Key Features

Perfect fit for Hyundai Sonata DN8 trunk spare wheel compartment

Designed for an M8x35 mm bolt (fully threaded or partially threaded)

Hexagonal recess for a 13 mm wrench or socket – easy to tighten without special tools

Solid, vibration-resistant clamping when printed with strong materials (PETG, ABS, ASA, or reinforced PLA)

Lightweight, corrosion-free, and rattle-free solution

Compatibility

Vehicle: Hyundai Sonata DN8 (all trims, including hybrid versions, with factory spare wheel well)

Bolt type: M8 x 35 mm, standard thread pitch 1.25 mm

Wrench size: 13 mm (hexagonal head)

Print Instructions

Material recommendation: PETG or ABS/ASA for heat and impact resistance (avoid PLA in hot climates or direct sun exposure inside the car)

Layer height: 0.2 mm

Infill: 40–50% (gyroid or cubic)

Perimeters: 4+ for strength

Supports: auto

Orientation: Flat on the bottom surface

For extra safety, add a rubber or felt washer between the mount and the wheel rim to prevent noise.

Test fit before printing final version – tolerances are designed for a snug but not tight fit for the bolt head.

This is a non-structural accessory – do not use for lifting or securing heavy loads beyond the spare wheel itself.

Happy printing and safe driving!

Tagi