Hampton Bay Swivel Chair Glide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The chair glides on our Hampton Bay outdoor swivel chairs needed replaced. This model is the replacement.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model replaces the worn chair glides on our Hampton Bay outdoor swivel chairs. We bought these from Home Depot years ago. We use them on a concrete patio around our fire pit. Over the years the original glides have worn and the screw heads have started to scratch the concrete, so I created these new glides to replace them.
AI was almost useless. Most of this was done directly in Prusa Slicer using simple shapes and the negative volume feature of the slicer. I was able to use AI to generate the M8 screw hole for me. Because of the negative volume feature of Prusa Slicer, the model looks incorrect, but it you pull it into Prusa Slicer it's just fine. I've also included the GCODE file for my 0.40 nozzel and PETG.
I used PETG for durability and 100% infill. I also used a support for the base of the glide to rip out for the recessed screw hole. The glide is larger and a little different in size than the original, but it seems to work just fine. I needed six of these for each chair.