1 / 3
Landing Feet for QAV-S 2 Joshua Bardwell SE 5" — zdjęcie 1
1 / 3

Landing Feet for QAV-S 2 Joshua Bardwell SE 5"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Landing feet designed to fit the JB QAV-S 2 5" drone

Ocena
0 / 5
Polubienia
0
Pobrania
16
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Landing feet designed to specifically fit the JB QAV-S 2, 5" drone

Printed with a Prusa MK3, I used 80% infill and M3x8mm screws. Other prints just didn't quite have enough wiggle room in the bolt pattern.

These fit flawlessly!

The TPU can make it difficult to keep the screws tight sometimes. I used a touch of blue loc-tite and be careful to not over tighten. After using loc-tite and flying through around 12 packs, I've encountered zero issues.

Tagi