2020 Ford Explorer Cabin Air Filter Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2020 Ford Explorer Cabin Air Filter Cover - Like it says :-)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2020 Ford Explorer Cabin Air Filter Cover - the original was lost by the dealersip (who then denied it) and a new replacement is only available as a large, expensive duct assembly. Couldn't find a used one.
Printed face down, supports to build plate only (for the tabs), used 3D Fuel PCTG, but I tried one in PLA for the fit up so either of those or PETG should be just fine.
Printed diagonally on a CoreOne L.
There's a step file if you want to improve on it :-)
On my car it goes in best if you slip in the right side first, then clip the left side in. Instead of just pushing it in, I pulled the left metal clip out enough to clear.
Also used thin "fits gap 1/16" to 3/16" foam weather stripping (which I don't think you really need).