1 / 5
Zonestar P802QR2 X Axis Mounts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zonestar P802QR2 X Axis Mounts In this remix I have: Manually repaired the STL files so that they are now printable…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Zonestar P802QR2 X Axis Mounts
In this remix I have:
- Manually repaired the STL files so that they are now printable (The file I downloaded appeared to have some mesh issues and would not print correctly.
- Optionally, I have modified both parts to make them stronger. The rear wall on both things have been increased by 2mm (you will have to adjust the X motor gear assembly position to adjust for the additional 2mm). I have also increased the thickness of the flange support web by 2mm. In the modified things I have increased the overall internal massing to make stronger where possible without effecting the functionality.
Print Settings
- 0.2 resolution, 4 wall perimeters and 30 % infill. No support required.
- I have printed at 210 to achieve better layer adhesion due to the orientation of the print.
Collection of all my upgrades for the Zonestar at the following link: https://www.thingiverse.com/thing:2936870
Category: 3D Printer Parts