1 / 1
Flexi Walking Cat – Articulated Print-in-Place Fidget Toy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-in-place articulated cat. No assembly, no supports, fully movable joints.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
Print this adorable walking cat and watch it wiggle! All joints are fully articulated straight off the build plate — no assembly, no supports, no glue.
Features
- Print-in-place, all joints move immediately
- No assembly, no supports required
- Keychain hole included
- Perfect as desk toy or small gift
Print Settings
- Layer Height: 0.2mm
- Infill: 15% (Gyroid)
- Supports: Not required
- Material: PLA recommended