Spur gear part compatible with the Black and Decker bsv 2020p vacuum and the Craftsman V20 Cordless Pet Stick Vacuum Cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a compatible gear that spins the brush of the vacuum cleaner that snaped on my vacuum.
- Ocena
- 0 / 5
- Polubienia
- 3
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Standard Digital File License
Tips for printing:
For more strength print diagonally (not tested vertically, may work).
I printed it out of ABS for additional strength.
May break if the bearings in the vacuum don't very spin well (probably the cause that broke the part)
You will need supports
Instructions:
It is compatible with the black and decker bsv 2020p vacuum.
You do have to take out 8 screws (two are under the really tiny wheels).
To get the tiny wheels out of the vacuum you need to get a flat edge screwdriver and pry them out.
You have to take the brush out and unscrew the black part on the side with the motor.
Lift the motor slightly and you can then pull the broken original part out.
Next check the barring's in the vacuum because if they don't spin well, that broke the part.
Then either get new bearings or if your bearings are good print the part and insert it.
To insert it you need to lift the motor again and push the part in the hole.
You also need to screw the other side back in.