Shimano Nexus shell lacing spoke jug insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert to reuse trashed Shimano Nexus gearbox shell as spoke cup.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by Wheel Fanatyk spoke cup. Just wanted to have option to sort DS/NDS lengths plus pushing/pulling spokes for hub swapping jobs.
Without modification it will topple over on centerlock interface on NDS. Using old disc to mage wide base would be option. I chose to remove it. Using lathe is advised. There are 2 steel inserts in aluminum. Smaller bearing race will release if carefully machine out everything around. Big plug closing NDS is there really tight. After turning out part of face under flange I was able to hammer it out.
Source CAD on Onshape.