1 / 3
Core One L roof rack brace for Creality Space Pi X4 — zdjęcie 1
1 / 3

Core One L roof rack brace for Creality Space Pi X4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Core One L roof rack attachable brace for the Creality Space Pi X4

Ocena
0 / 5
Polubienia
15
Pobrania
51
Wydruki
0
Wyświetlenia
742
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A pair of braces for the Core One L roof rack to place the Creality Space Pi X4 filament dryer.

Printing

  • Material: PC recommended for structural strength and heat resistance.

  • Nozzle: 0.4mm

  • Layer height: 0.2mm structural

  • Infill: 15% gyroid or whatever

  • Perimeters: 3

  • Solid layers: 5 top, 4 bottom

  • Brim: 8mm wide with default 0.1 separation gap. Without brim the will likely significant warping.

  • Supports: add supports so the cutout for the roof rack is supported

Bill of materials

  • Printed parts: COL-roof-rack--accessory--space-pi-x4.stl contains both braces needed.

  • Non-printed parts: 4x M3x16mm socket screws to attach braces to roof rack, they replace 4x M3x12mm of the roof rack BoM.

Assembly

  • Remove brims and supports.

  • Remove the 4 M3x12mm from the roof rack top, if you assembled it, the 2nd most from the outer edge.

  • Align the braces with the screw holes of the roof rack, screw holes should be nearer to the center. Refer to the photos if needed.

  • Attach the braces with the M3 screws.

  • Place the roof rack on the Core One L, place the Space Pi X4 on the roof rack braces, make sure that everything seats nicely, it's a snug fit.

Consider leaving a make and sharing your roof rack adventures. A like is appreciated if you got some use out of this model.

OpenSCAD

Requires the BOSL2 library.

Changelog

  • 2026-04-25: v0.2.0: updated to HSW compatible spacing

  • 2026-04-17: v0.1.0: initial version

Tagi