Sillybutts' Smiley Ram Base - Talon Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This merges the updated geometry Sillybutts made on the original ram base for ease of printing with the talon ram base
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sillybutts made a great remix of the Smiley ram base that improves upon the geometry of the -123 o-ring grooves so that they're easier to print without supports. However, the ram base included with the Talon remix of the smiley has slightly different bolt arm linkages. So I merged the two ram bases where the bottom portion is cut from the Sillybutts remix and the top portion is from the Talon remix.
Print without supports using Mighty Shrub's recommendation of 5 walls, and at least 10 top+bottom shell layers. At this point the part should be sturdy enough where any sensible infill will work. I went with 15% gyroid. Even using inner/outer/inner works well due to the chamfered grooves.