Inholland Electric Dragonfly Kit-Card
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily assemble your own Inholland Electric Dragonfly with this kit-card.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This kit-card will let you have a mini model of the Inholland Electric Dragonfly.
Break of the 0.8mm sticks holding it in place. The small card can be used as a stand for the aircraft as shown in the picture. Slide in the wings in the slots. The larger one is the front wing. They should fit with little force applied.
Inholland University of Applied Sciences is developping the electric drive train for a Viking Dragonfly Mk2. This amateur aircraft is retrofitted with an electric motor instead of a combustion engine and a battery pod was added below the aircraft. This project is done to increase experience and knowledge for the Aeronautical Engineering study and to develop battery technology for aviation.
Print settings:
0.20mm SPEED 10% infill (or none), supports on build plate only for best results.
Printed on the Prusa Core One and the Original Prusa i3Mk3.