2.2 Inch Offroad RC Car Rims - 6 Spoke
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1738
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex.
I suggest PETG for strength, but it might work fine with PLA, I just haven't tried that.
Other rim designs I have:
Dish https://www.prusaprinters.org/prints/16922-22-inch-offroad-rc-car-rims-dish
Dials https://www.prusaprinters.org/prints/16921-22-inch-offroad-rc-car-rims-dials
Print instructions
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: .15mm
Infill: 50%
Notes:
For best results, print these with the outer face pointing up.