Pivoting Filament Oiler Extension Arms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simple Extension Arm to my Pivoting Filament Oiler to allow the Oiler to hang immediately below a spool…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a very simple Extension Arm to my Pivoting Filament Oiler to allow the Oiler to hang immediately below a spool by hooking to the spool axle itself. Designed for use with the Ender series standard spool holder width.
Pivoting Oiler\Original Thing: https://www.thingiverse.com/thing:3795861
This thing is not handed but you will need to print 2 parts to make the assembly reasonably robust (as per the uploaded images).
The mounting plate can be fixed either up or down to vary for different print heights or to ease filament path due to the capacity of the spool.
You will need 2 x M4 x 16 bolts + nuts to attach the arms to the oiler mounting plate.
Printed with @ 0.3 layer height, 3 perimeters, 30% infill, no supports in Primavalue Orange PLA.
Category: 3D Printer Parts