Ender 3 - Ender 3 Pro Side Mounted Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There is a newer version of this thing which prints faster and is easier to assemble at this link:…
- Ocena
- 4,714 / 5
- Polubienia
- 252
- Pobrania
- 1234
- Wydruki
- 10
- Wyświetlenia
- 5672
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There is a newer version of this thing which prints faster and is easier to assemble at this link: Ender 3 - Ender 3 Pro Side Mounted Spool Holder V3 by boothyboothy | Download free STL model | Printables.com/thing:4461496
There is a Remix\Alternative Version of this thing here: Pivoting Side Mounted Spool Holder for the Ender 3 & Pro by boothyboothy | Download free STL model | Printables.com
Update:07\01\20
Uploaded a variation (E3_Spool Holder_V2) with extended fixing slots to allow the part base to be set flush with the bottom of the extrusion and therefore facilitate the integration of an Ender 3 foot on the spool holder. This version is untested so please treat as WIP.
I wanted a spool holder that was connected\fixed to the printer, side mounted that did not put strain \vibration on the frame. I therefore knocked this up for my latest Ender 3 Pro. I admit this may be slightly over engineered but I wanted something that was robust and would last.
Apologies in advance if there is a similar thing uploaded\published that I have not noticed.
You will need 3 x M5 x 20 mm Bolts + Nuts to attach the stock Ender 3 spool holder to the thing. You will also need 2 - 4 M4 x 10 mm Bolts + T nuts to fix into the side 2020 extrusion.
Printed with PrimaValue Orange PLA, 210C, 50C Bed,.02 resolution, 30mms, 30% infill and 3 perimeters.
Category: 3D Printer Parts