Cosplay Mask, Hat and Wig Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Please Note: You will need a large format 3d printer like the CR10 to print these things. There is a newer version of…
- Ocena
- 5 / 5
- Polubienia
- 182
- Pobrania
- 461
- Wydruki
- 3
- Wyświetlenia
- 2446
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Please Note: You will need a large format 3d printer like the CR10 to print these things.
There is a newer version of this thing here: https://www.thingiverse.com/thing:3529550
This is a Mask, Hat and Wig Stand. The design emphasis was minimalism and speed of printing. I have also included an optional\additional Halo part for keeping flexible items such as Hats and Wigs in shape.
My protoype was a little small for my Batman Cowl so therefore if your printer can manage a larger print it may be worth tweaking the scale in your slicer by 5-10%.
Parts are a reasonably tight interferance fit but can be glued for greater security.
Printing Instructions:
1.The things were printed fast using a 0.8mm nozzle, 0.6mm layer height and @40mms. 1 perimeter and 7% infill.
2.Further speed reductions may be achieved with only printing bottom layers and rely on the infill for rigidity. Largest part was printed in under an hour.
Category: Organization