Hedgehog pen holder (with F360 sources)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pen holder from my childhood.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 797
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a pen holder from my childhood. I've replicated it, to give it eternal live through the community :-)
Print instructions
Nothing special needed.
Model is printed from PETG, with 0.6mm nozzle. However 0.4mm should be just fine. It look's like PETG is too flexible and better option will be the PLA.
It would be probably best to edit model to have thicker spikes, however I'm little bit tired from Fusion360 issues with repeating patterns.
If someone with stronger computer would like to do that, I'll be happy :-)
It is possible to split eyes and nose from head in the slicer, so it should be possible to easily print it multicolor.
F360 sources are here: https://a360.co/35HVI69