Vibration Dampeners for Wanhao Duplicator I3 Plus, Balco Touch, Maker Select
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dampeners for Wanhao Duplicator I3 Plus - Balco Touch - maker select Just to clarify this thing was primarily designed…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Dampeners for Wanhao Duplicator I3 Plus - Balco Touch - maker select
Just to clarify this thing was primarily designed as a vibration dampener to reduce ghosting\ringing by reducing vibration transfer from the work surface but may also reduce noise tranfer as a by product of this thing.
In this remx I have completely redesigned with dual thinner walls to provide flexing to part whilst maintaining form.
Printed with no infill at 0.3 resolution and 2 perimeters. Prototypes printed in PLA but PETG always an option if greater longevity required. You may find PETG versions will flex slightly more than PLA. No supports required.
Category: 3D Printer Parts