Fabric tape holder. TPU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a low‑profile fabric‑tape holder that keeps rolls locked. Print it in TPU so it flexes
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Print this in TPU — the flex is mandatory. Without it, the parts won’t slide together properly. I had to use a small screwdriver to pry a few of the tabs into place during assembly. The walls are 8 mm thick on the bottom, top, and sides, so it’s basically a solid print, and I also ran a high infill for extra strength. Once everything was assembled, a tiny bit of oil helped the mechanism spin smoothly.
This design is made for 60‑inch fabric tape. Anything longer won’t fit the holder properly.
If you found this useful, please leave a like or drop a comment — I’d really appreciate the feedback.