1 / 5
Ham Radio Dual PowerPole with USB-C PD "Juicebox" — zdjęcie 1
1 / 5

Ham Radio Dual PowerPole with USB-C PD "Juicebox"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dual powerpoles and a USB-C PD buck converter.

Ocena
5 / 5
Polubienia
6
Pobrania
27
Wydruki
2
Wyświetlenia
204
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This model is entirely my own design, but obviously heavily inspired by the original from Thump2010.

The model is just a plain, unlabeled box. I added my callsign in the slicer.

Main difference is the use of a different buck/boost converter that adds a USB-C port capable of USB-PD, so that with the addition of a trigger board, can give you 5, 9, 12, 15 or 20v.

The converter I used is an ACEIRMC 60W 6-35V DC to USB Type C & B board. Here's a link to the exact unit I bought from Amazon.

https://www.amazon.com/dp/B0BX3TFX3J

Slicer Settings & Filaments

You will need to flip the lid over, it is intended to print with the flat surface against the bed.

I printed in ABS, but this should be good in any material. I'd advise PETG as a minimum for field use.

Intended for 0.4mm nozzle, and 0.2 layer height.

I printed with 4 walls.

Tagi