Rattan Rocking Chair Leg Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Footer inserts for re-attaching rattan rocker rails back to rusted off legs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
Our rattan patio rockers have thin metal tubing in the legs where they attach to the rocker rails. After years of water collecting in the rails, ofc the tubes rusted and snapped off at the rails. These are some handy printable inserts I drafted up for the rear and front legs so you can trim away the rusted bits and tap these in for a friction fit (I suppose you could also screw them to the leg if you needed to).
I printed in ABS, 50% infill for structural support (plus if I needed to screw it onto a leg, I wanted something for the screw to anchor into without splitting it). YMMV.
Included FreeCAD file if you want to rescale for your own use case.
Oh, and the reason the "front" insert is chamfered so aggressively is that the rattan was woven through some holes in the lower part of the leg, so I needed something that could push past them without cutting them.