G7UFO case for the TeensyMaestro v2 PCB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my own case design for the TeensyMaestro Kit and is designed to be mounted on a 75mm VESA mount which provides
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Background on the TeensyMaestro
The TeensyMaestro is a custom-built hardware controller first designed by Len (KD0RC) to interface with FlexRadio transceivers - specifically models in the 6000 and 8000 series.
It performs some, but not all, of the common functions that the SmartSDR app or the Flex Maestro perform. The name TeensyMaestro comes from its core component: the Teensy 4.1 microcontroller, which powers the device.
Len's initial version was built using point-to-point wiring which presented a challenge for builders. Len (KD0RC) and Simon (NV0E) have created a PCB and matching front panel that simplifies the build process.
This Model
This is my own case design for the TeensyMaestro Kit and is designed to be mounted on a 75mm VESA mount which provides some flexibility on how you mount it.
The building instructions page shows how it fits together and how its custom made for the components in the kit.
This doesn't include the front plate shown which is an aluminium plate ordered alongside the PCB.