Midland GXT67 Pro Vehicle Charger Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for the Midland GXT67 Pro Vehicle Charger for mounting to a standard 1/4-20" threaded arm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
The Midland GXT67 Pro comes with a vehicle charger, but there's no way to mount it in your vehicle so it is handy. I ended up picking up a Small Rig Magic Arm and designing this bracket to hold the charger+radio where it would be convenient.
Printing
If you keep this in your car on hot sunny days, PLA is likely to deform, so PETG, ABS or ASA is suggested.
Perimeters = 4
Top / Bottom layers = 3
Infill = 40%
Supports = Yes
Parts are already oriented for printing.
Necessary Hardware
3x 16mm M3 SHCS
3x M3x4mm heatset inserts
2x 1/4"-20 x 8mm heatset inserts