Deity PR-2 1/4" Threaded Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for the Deity PR-2 pocket recorder that adds 3 1/4" threads for mounting stereo bars or to tripods.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
The Deity PR-2 only comes with a belt clip to hold it. I guess you can attach the belt clip to a cold shoe but I wanted to be able to directly screw in stuff to the PR-2.
I decided to add 3 thread holes so you can either mount to a tripod or handle, but also add on stereo bars.
I have yet to figure out the whole rig yet, but I am planning on adding two stereo bars that I can use with Clippy EM272's, Earsight Binaurals, or any other small mic pair that can be powered by the PR-2 for a field recording rig that I can easily carry in my pockets.
To complete the build you will need 3 heat set 1/4" threads
I used: ruthex 1/4" Short Threaded Inserts - RX-1/4“-20x6.4
https://www.amazon.com/dp/B0F2ZBN1K9
And you will need some heat set insert tips and a soldering iron. I used these:
ruthex 7X Soldering Tips
https://www.amazon.com/dp/B0DP51DDF7
And I used a IMAGE 60W Welding Soldering Iron but I think these should work with most soldering irons.
If you make a build with this I would love to know how you are using it!