Geometrical Candleholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This abstractly designed geometrical candleholder holds one up to ~23 mm candle.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This geometrical candleholder has an abstract design made up from three parts, which are recommended to be printed in different colors. The bottom section is a bent-outward cylinder with twisted ribs, the middle section a quadratic hourglass-kind shape which's edges are filleted. The top section is, again, a cylinder with ribs, but neither twisted nor bent outward.
The color changes are very basic and can be done using any printer with ease.
I hope this will make your home look a little nicer and more modern while also giving a cozy atmosphere. Have fun printing it and feel free to remix it (added the .step).
Printing recommendations
Layer height: As fine as your printer can get
support: Not needed, all overhangs are less than 45°
Infill: 15 % (to ensure that long candles don't make it tip over)
Color changing
Marlin
Use M600
Klipper
Use PAUSE
(In Cura, go Post Processing / Add / Filament Change. In OrcaSlicer, rightclick the layer slider at the right height and click Add Filament Change. There are also dozends of Youtube tutorials ;-) )