Bellamy Pinette kids bed bumper set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom bed bumper set designed for the Bellamy Pinette bed, allowing you to adjust the distance from the wall.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
This model is free. If you appreciate this model, please leave a download and a like!
This is a custom-designed bed bumper system made specifically for the Bellamy Pinette bed. The model does not interfere with the drawer. The blocks prevent the bed from hitting the wall while also protecting your baseboards from damage.
It also helps with a common issue in kids’ rooms: the bed being pushed right up against the wall, making it easy to reach over and scratch or mark the wall surface. By keeping a consistent gap, this bumper helps reduce that kind of wear.
The set can be printed without support at 0.2mm layer height and 15% grid infill.
The set includes four different models to suit different needs:
A one-piece 18 cm block for a simple, fixed solution. Make sure the chamfer faces the floor.
A starter block with a cutout for the bedpost.
A middle extension block that can be printed multiple times to increase the spacing as needed.
An end block with a chamfered edge. Make sure the chamfer faces the floor.
The modular versions connect using a dovetail system, allowing you to fine-tune the distance between the bed and the wall. The chamfer on the end block is designed to face downward toward the floor, ensuring it won’t interfere with or damage your wall’s baseboard edge.