Keychain Snorlax Pokemon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keychain of Snorlax Pokemon
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a Snorlax keychain, printed in white and dark blue. I have tried to play with the filament transparencies, for example, on the feet, which can be seen in the second photo.
The central part looks strange because, as seen in the last photo, my printer had a first layer adhesion failure, but the design is fine and has no flaws.
It is printed in two colors, with an Elegoo Centauri Carbon, without multicolor, since it only requires one color change and can be done manually. The print takes approximately 6 minutes. I printed the keychain with a 0.4mm nozzle, although for this type of print with small details, a 0.2mm nozzle is ideal, even if it takes longer to print. However, I designed it without much detail to prevent those same details from being lost, as I don't have a 0.2mm nozzle yet.