1 / 3
Audi A2 fuse door clips, hinges - boths sides with right size — zdjęcie 1
1 / 3

Audi A2 fuse door clips, hinges - boths sides with right size

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Audi A2 fuse door clips, hinges - boths sides with dimensions exactly as they should be. Parametric

Ocena
0 / 5
Polubienia
2
Pobrania
20
Wydruki
0
Wyświetlenia
101
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Audi A2 fuse door clips, hinges - booths sides with right size

  • The dimensions are exactly as they should be. Left - smaller. Right - normal size

  • Parametric, Freecad v1.1 parametric file included

  • Remix.

Mounting
  1. Uncover the foil with the fuses description.

  2. Remove the remains of the original hinges.

  3. Roughen the surface where the glue will be.

  4. Sand the edge of the fuses cover a little so that the glued hinge is straight.

  5. Glue the new hinge in place of the original one, the edge of the fuses cover and the notch between the protrusions of the original hinge will help find the correct position of the new hinge on the fuses cover.

  6. Let it dry, try it, if the hinge is difficult to release, enlarge the opening area in the printed hinge a little with a file.

I used super gel glue and PLA +.

Print Settings
  • Print form PLA+ or PETG (durable for higher temperatures, more flexible, less brittle.)

  • No supports

  • 0,2 (or 0,28 with 0,6 nozzle)

  • All solid perimeters, no infill

Tagi