Anthbot M9 M5 RTK Pole Mounting Clamp 25mm + 28,6mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp to mount the RTK Pole of the Anthbot robot lawnmower to a wall or some other flat surface.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
With this clamp you can mount the RTK Pole of the Anthbot robot lawnmower to a wall or some other flat surface. This is much more strurdy than the standard ground spike mount and prevents accidental movement of the rtk antenna.
The clamp with the closed hole on one side can be used as the lower clamp so the rtk pole can not slide down even if the clamp screws come loose. It is also possible to just use the open clamp for both clamps to have more flexibility in adjusting the pole height.
Screw holes are for 6mm secrews. There is a version for rtk pole diameter of 25mm or 28.6mm
Printing Material: PETG
No support needed