PARKSIDE adapter for some DREMEL Acessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello! a friend of mine was throwing in the rubbish a Dremel accessory, but i made an adapter to match the PARKSIDE…
- Ocena
- 4 / 5
- Polubienia
- 34
- Pobrania
- 264
- Wydruki
- 0
- Wyświetlenia
- 1108
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello! a friend of mine was throwing in the rubbish a Dremel accessory, but i made an adapter to match the PARKSIDE PFBS 12 B3 tool.
This adapter match with DREMEL® (225), (576) and others.
This part has been designed to avoid 3D support and bridge, probably I could have stretched the collar for 5 mm more, i will do in on revision B.
I suggest you to print at 0,10 with 5 perimeters
Regards
Jonweb
Print Settings
Printer:
Artillery X1
Rafts:
No
Supports:
No
Resolution:
0,10
Infill:
30%
Filament:
SUNLU PETG
Flash Green
Category: 3D Printing