Vise soft jaws for screws and bolts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Excellent for shortening screws and bolts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you've ever tried to hold a bolt with its head in the jaws, you will know the angel-like squealing that can be heard right before the bolt turns sideways and you hit your knuckles onto the vise.
Say no to fistbumping your vise and highfive the new convenience of shortening the bolts for your next project! Now you can clamp bolts and screws upside down without a subsequent trip to the doctor!
I was mainly concerned with holding socket head screws (ISO 4762 for the pedantic ones <3) though other types also work. These soft jaws are a friction fit on my vise but I can edit them to fit your vise or you can download the source files and do it yourself. Magnets would also be an option but they have the nasty habit of attracting metal chips so I didn't include them. Another way could be to fasten the soft jaws with rubber bands.
The only thing to consider before printing is the heat resistance of the material: When sawing off or filing on a screw, it gets hot really quickly which deforms the plastic. So use something like PC or ABS if possible. For light use, PETG should also be fine.