1:16 Toyota Tacoma Working V6 Add-On
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A V6 engine add-on kit for the 1:16 Truck/Crawler Chassis and 1:16 Toyota Tacoma Body
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a V6 add-on kit for the 1:16 Toyota Tacoma RC and 1:16 Truck/Crawler Flexible Rolling Chassis models. When the chassis moves, the pistons pump up and down automatically.
Required Hardware & RC Products
4x M2x6mm screws
4x M2x16mm screws
4x M3x14mm screws
20x M2x4mm flat-head screws
WPL Metal Axle: only WPL rear kit.
You will also need all the files and parts from 45% Scale Working V6 Engine
Print Settings
General Print Settings for all the .stl files
0.15mm layer height or better
4 perimeters, 15% infill
All files should be printed in the orientation they come with
Note:
Make sure you have excellent bed adhesion and that your printer is tuned correctly.